沖壓機械手性能好壞怎么判斷？
時間：2018-06-14 來源：本文搜集于網絡，由沖壓機械手廠家創盈時代整理，歡迎轉載，轉載注明出處 點擊：924
很多企業在采購沖壓機械手的時候，一般會在經過篩選之后留下覺得中意的幾家公司，然后在經過對沖壓機械手的價格和性能進行對比，最終再進行綜合判斷，可是您知道從哪些方面可以判斷沖壓機械手性能嗎？下面沖壓機械手廠家來簡單為大家分析下。
Many enterprises in the procurement of stamping manipulator, usually after the selection after the selection of a few companies, and then after the price and performance of the stamping manipulator to compare, and finally a comprehensive judgment, but do you know from which aspects can judge the performance of the punching manipulator? The following press manipulator manufacturers to analyze for you.
企業在采購機械手的時候，除了思考報價以外，機械手的性能才是最重要的，可是機要手的性能到底要怎么來衡量呢?沖壓機械手性能常按速率峰值來假定?？墒?，這并不是悉數，除非咱們曉得加速度，顯示的是兩個機械手的速度-時刻圖表，一個的速度峰值是3m/s，另一個為2m/s。
The performance of the manipulator is the most important, but how to measure the performance of the hand. The chiral energy of the stamping machinery is often assumed at the peak rate. But this is not all, unless we know the acceleration, which shows the speed - time chart of the two manipulator, the peak velocity of one is 3m/s, and the other is 2m/s.
有人能夠揣度最快的機械手是具有較高速度峰值的那一個。但是，兩個機械手能在1秒鐘時刻熟行走出2800mm的一樣間隔。這是能夠的，由于速率峰值較低的機械手比速率峰值較高的機械手具有較高的加速度45m/s2，后者的為13.3m/s2。機械手行走一段特定間隔所花時刻是更為有用的。這個信息能夠從沖壓機械手生產廠家那里取，也是在機械手沒有式樣之前可以判斷設備性能的一個參考依據。
One can guess that the fastest manipulator is the one with higher speed. However, the two manipulator can walk in 1 seconds and walk out of the same interval as 2800mm. This is possible because the manipulator with higher speed peak value has higher acceleration 45m/s2 than the higher speed manipulator, and the latter is 13.3m/s2. It is more useful for a manipulator to travel at a specific interval. This information can be obtained from the stamping manipulator manufacturer, and it is also a reference for judging the performance of the equipment before the manipulator has no pattern.
深圳市創盈時代科技有限公司是一家專注于沖床機械手,上下料機械手,沖壓機械手，工業機器人，非標自動化設備的研發生產和銷售于一體的國家高新技術廠家。
原文地址：http://www.komunikattivo.com/jszc/456.html
本文關鍵詞：沖壓機械手性能
